world

Continued from home page

Mechanical filters and separators isolate particles and globules, but they don't remove pollutants that have become emulsified in the water.  Soapy, oily, greasy water that went into a filter is still soapy, oily, and greasy when it comes out.   Because filtered water that is stored in tanks still has organic material in it, anaerobic bacteria will grow, which will cause the water to smell foul, like rotten eggs, making it unusable.

Bio-technology renews waste water so that it can be reused over and over again.  Anaerobic bacteria cannot grow in our clean water holding tanks because our process eliminates organic compounds.

Microbes convert these pollutants into carbon dioxide and water:

Hydrocarbons, which include FOG's (fats, oils, grease), gasoline, kerosene, diesel fuel, oil, cutting fluids, hydraulic fluids, grease, lubricants, and other petroleum products.

Surfactants, which include soaps, detergents, waxes, sealants, and wetting agents.

Our process is different because we are able to clean much higher volumes of waste water per cubic foot of bioreactor than our competitors.  Our systems are processing 1,200 to 20,000 gallons per hour in surprisingly small footprints, but the technology can be easily scaled for any volume, flow rate, and pollutant concentration.  We have several options for retrofitting our system into your existing facility, and when designed into new construction our installations can be made virtually invisible.

Our water renewal technology is ideal for any business that wants to reduce their water bills and waste disposal costs, or mitigate their sewer access charges due to fines, surcharges, or facility expansion.  Our technology works, will save you money on your water and sewer charges, and we have the experience necessary to integrate into your facility.


Photographs From Installations

To learn the step by step proces of how our water resotration systems work, visit our FAQ page.

Above Ground System

This is our 1,200 gallon per hour above ground aluminum tank.  Dimensions are 6ft.x6ft.x3ft.  They can be daisy chained together.  Includes a hydrocyclone.

















Hydrocyclones

On the left (bottom half of the photo) is a pair of hydrocyclones for a 10,000 gallon per hour system.  Above the hydrocyclones are the aeration pumps for the bioreactor.  On the right is a cluster of hydrocyclones for a 20,000 gallon per hour system.

















Underground Fiberglass Tanks





















Underground Concrete Tanks

The bioreactor being built for a 10,000 gallon per hour system.


























An indoor, under the floor concrete tank installation.




















The Results

Left: Microbe activity in the bioreactor.            Right: Samples of renewed water.











For more information about how our technology will work with your process, please contactus.
Digest Hydrocarbons So You Can Renew & Reuse
  • Renew and reuse the same water over and over again.
  • Dramatically reduce your water and sewer fees. Can be used for zero discharge applications.
  • Eliminate costly disposal and incineration services, load charges, upgrade assessments, usage fines, and permits.
  • Emulsified hydrocarbons and surfactants are converted into carbon dioxide and water.
  • Biological water renewal is cost effective to install & operate.
  • Scalable for any volume, flow rate, and COD and BOD load.
  • Integrates into your existing facility or new construction. 
  • Expand your business without over-burdening the local municipal infrastructure.
  • Completely safe for workers and plant life.  Will not breed pathogens.